PBT弹性体微相分离及对其力学性能的影响研究

为了获得微相分离对宽温PBT叠氮聚醚弹性体力学性能的影响规律,用红外光谱分析法(FT-IR)和动态热力学分析法(DMA)研究了PBT叠氮聚醚弹性体产生微相分离的机理和影响因素。用调节硬段含量、交联参数的方法调控其微相分离,控制适当的微相分离程度可显著改善推进剂的力学性能。研究结果表明:在二元醇扩链的弹性体体系中,当硬段含量约为15%时,弹性体发生相对最大比例的微相分离,体现出较佳的综合力学性能。通过微相分离的调控可获得宽温范围内综合力学性能较好的叠氮聚醚推进剂用粘合剂基体材料。     

Broadening of Fe X (6374 Å) profiles above the limb in a coronal hole

Profiles of the visible Fe X (6374 Å) coronal emission line as a function of height above the limb were obtained out to 1.16 solar radii in a coronal hole using the NSO/Sacramento Peak Observatory Coronagraph, Universal Spectrograph and a CCD camera. These are the first coronal line profiles obtained as a function of height in a coronal hole from the ground. Analysis of the line widths suggests a large component of nonthermal broadening which increases with height ranging from 40 to 60 km/s, depending upon the assumed temperature or thermal component of the profile.     

硼酸盐玻璃中稀土离子的发光研究

应用荧光光谱、红外振动光谱等研究了在可见光区发光的Ｐｒ（３＋），Ｓｍ（３＋），Ｅｕ（３＋），Ｔｂ（３＋），Ｄｙ（３＋），Ｅｒ（３＋）和Ｔｍ（３＋）等镧系稀土离子在硼酸盐玻璃中的发光行为，系统地分析了稀土离子在硼酸盐玻璃基质中的激发谱和发光谱特性。     

老化时间对涂层性能的影响

利用电化学阻抗谱(EIS)技术研究了含有锌铬黄防锈颜料的环氧酯漆涂层的耐蚀性能。研究发现,当老化时间为4周时,涂层的耐蚀性能最佳,时间过长或过短都使得涂层性能下降。并且EIS技术可以用来研究涂层的老化。     

主成分分析用于近红外光谱定量测定高硅氧／酚醛预浸料树脂含量及挥发份含量研究

采用傅里叶变换近红外漫反射光谱技术分析了酚醛树脂固化过程的光谱变化,发现高硅氧/酚醛预浸料的近红外光谱经一阶导数处理后,被树脂信息掩盖的挥发份(乙醇)的光谱信息显露出来,由此采用处理后的光谱定量分析挥发份能取得更精确的结果。结合主成分分析法研究了高硅氧/酚醛预浸料树脂含量、挥发份含量的定量分析。结果表明,预浸料的第一主成分在树脂含量上有极高的正载荷。用主成分回归所建立的模型对未知样品预测,树脂含量和挥发份含量平均标准偏差分别为0.6114和0.1885。     

Expectations for Infrared Spectroscopy of 9P/Tempel 1 from Deep Impact

The science payload on the Deep Impact mission includes a 1.05–4.8 μm infrared spectrometer with a spectral resolution ranging from R∼200–900. The Deep Impact IR spectrometer was designed to optimize, within engineering and cost constraints, observations of the dust, gas, and nucleus of 9P/Tempel 1. The wavelength range includes absorption and emission features from ices, silicates, organics, and many gases that are known to be, or anticipated to be, present on comets. The expected data will provide measurements at previously unseen spatial resolution before, during, and after our cratering experiment at the comet 9P/Tempel 1. This article explores the unique aspects of the Deep Impact IR spectrometer experiment, presents a range of expectations for spectral data of 9P/Tempel 1, and summarizes the specific science objectives at each phase of the mission.     

高摩擦性能碳／碳复合材料的微观结构

使用激光拉曼探针和电子显微术对试样的断裂面和薄膜样品观察及电子衍射技术研究了两种抗摩擦性能相差悬殊的碳／碳复合材料的微观结构，发现两种材料的微观结构在石墨晶体的结晶结构完整性和取得性以及纤维和基体间的界面行为上有显著差异。     

碘分子的荧光谱和激发光谱的测量和研究

观察到碘分子在光谱线514.5nm感应作用下的荧光谱,同时得到了在514.5nm附近碘分子的激发光谱。这两种谱的测量和研究表明,两能极模型对碘分子是一个很好的近似,普通光感应的碘分子荧光谱明显不同于激光感应的碘分子荧光谱。 在上面测量和研究的基础上,建立了新的物理模型以应用到激光感应荧光测量技术中。在488.0～544.0nm间,观察到了碘分子的激光感应荧光。     

Spectroscopy peculiarities of thermal plasma of electric arc discharge between electrodes with Zn admixtures

Plasma of the free burning electric arc between Ag–SnO₂–ZnO composite electrodes as well as brass electrodes were investigated. The plasma temperature distributions were obtained by Boltzmann plot method involving Cu I, Ag I or Zn I spectral line emissions. The electron density distributions were obtained from the width and from absolute intensity of spectral lines. The laser absorption spectroscopy was used for measurement of copper atom concentration in plasma. Plasma equilibrium composition was calculated using two independent groups of experimental values (temperature and copper atom concentration, temperature and electron density). It was found that plasma of the free burning electric arc between brass electrodes is in local thermodynamical equilibrium. The experimental verification of the spectroscopic data of Zn I spectral lines was carried out.     

SF6分解气的近红外在线检测技术研究

为满足SF6绝缘电气设备故障监测与预警的实际需求,分析了国内分解气检测研究现状.对比近红外与中红外吸收光谱检测技术,提出近红外吸收光谱技术在线检测的技术方案.计算分析待测气体特征谱线的吸收系数、吸收光程和电路信噪比对精度的影响,完成系统参数设计.提出SF6分解气在线检测系统方案,实现对H2S、HF和CO这3种气体测量.数据分析表明,系统检测精度优于5×10-7,表明该系统满足电力行业在线测量的需求.